How to make a DIY wine rack out of a pallet (video)

You don't need to be a woodworking expert to complete this simple, chic wine rack. It will be sure to be a focal point in your bar and a definite conversation starter when you tell guests that you made it yourself! Plus, who doesn't need a good spot to display their favorite bottles and stemware?
So, let's get started. You will need just a few simple tools to complete this charming piece. As always, don't forget to protect yourself with the proper safety gear. Watch the video below for the entire step-by-step process to do this on your own.
Advertisement
DIY wine rack from wood pallets
Directions
1. Check out the landscape supply stores for your pallets. Usually, you can find these for free. Clean off any excess dirt and grime from your pallet with a water hose and let dry. This is a good time to make sure there aren't any stray nails or staples left in your pallet. Use the claw side of your hammer to take and of these out.
2. Lay your pallet down on your workspace. Measure about an inch up from the notched part of the side brace on the pallet, and with a square ruler draw a line. Do this on all three notched braces. Go ahead and reserve three extra slats you are going to use later. Remove all extra metal and sand them as well.
3. Use a saw to cut where you marked your lines. Then, using heavy-grit sandpaper to start, sand the edges down, so everything is uniform. You want to remove any rough spots, and the finer grain sandpaper you use, the better finish you'll get.
4. Measure and cut two of the extra slats you pulled earlier to the same length as the pallet. The first one will go on the top of the pallet piece. Just a couple taps with a hammer will do, or if you have an air gun, it will go even faster.
5. Use a level to make sure the top slat is straight and plumb. If it's not level, you can fix it by adjusting your nails and either hammering them in a little harder in spots or use the claw end of your hammer to pull them out a little.
6. Flip your pallet sideways and measure the openings on the opposite side from your top slat. Take the other pallet slat you prepared earlier and cut it to match each of the openings. You want it to sit flush in the space, so be sure to measure accurately. Use finishing nails to attach the pieces securely.
7. Then, cut some small pieces the same width of your pallet and attach them to the corners using nails. Now, using the third extra slat you prepared earlier, measure spaces for your wine glasses and mark the measurements along the entire width of the pallet. Make sure your wine glasses will have room to hang.
8. Use a wood bit to make a hole on your marks. Cut straight from the edge of the pallet to the place where you made your hole to allow space for your wine glass stem to slide in. Be sure to check that it's wide enough with an actual wine glass you plan to display.
9. Now, put wood glue on the brackets you made on the edges, and nail the piece you just made with the wine slats to the corners. Sand everything one final time.
10. Hang your wine rack on your wall. Use wood screws and hang it on studs for added security. You don't want your wine and glasses to come crashing down.
Pro tip: When hanging your rack, use a stud finder to mark where your studs are so you create minimal damage to your drywall. Be sure to use screws that are long enough to grip deep into the studs. Use your level to be sure that you're hanging your wine rack properly.
Advertisement
Resources Joe Lydic

This creative pallet project is an excellent way to add a bit of flair to any living space.
August 3   ·  
Advertisement
Gina, the mastermind behind Kleinworth & Co., swears by this DIY pallet project. She assures in her blog that neither she nor her husband are professional DIYers, so 'if we can do it – you definitely can too'.
July 30   ·  
Combine your love of cats and your love of pallets for one sweet project.
July 24   ·  
They're super-quick to make and can help you make a dent in your stash of unused yarn as well. What's not to love?
July 20   ·  
This stitch motif adds subtle charm to any knit.
July 11   ·  
Quilting is a craft that has been around since, according to Emporia State University, 3400 B.C. Known for sure to have been used by the Egyptian Pharaohs, quilting eventually spread from the Middle East to Europe. For sure, bed quilts were used in..
July 15   ·