How to build a DIY strawberry planter out of a wood pallet

Tanya was a woman on a mission: She wanted to build a pallet planter for strawberries that met her standards for stability, soil capacity and aesthetics. Tanya didn't hesitate in putting her hands to work once she realized she'd have to create her own planter design. "Eventually, after finding nothing that really jumped out at me, I came to the conclusion that I'd have to come up with my own design," she writes on her blog, Lovely Greens.
The design she created is beautiful and practical; using blocks from the pallet as feet is not only good-looking, it helps with drainage and slows down the inevitable rotting of the bottom. Tanya recommends a jigsaw and electric screwdriver for this project, but "I'm quite sure that anyone who is comfortable using a hammer and hand-saw could complete this project."
Advertisement
The first thing that Tanya does is to split the pallet into three equal parts by sawing first one side, then flipping it over and sawing the other side in the same places. Tanya's pallet has nine slats, so her three parts have three slats each.
The next step is to disassemble the three sections. Tanya carefully removes the short slats and blocks from the middle piece and the short slats from one side of the two end pieces, and sets them all aside for later use.
With a mallet and wedge, Tanya separates the blocks from the center section from the slats they're attached to. The blocks will become the feet for the strawberry planter, and the slats will become the short sides.
 
Next, Tanya builds the actual container. She recommends an electric screwdriver for attaching the bottom (the center of the three cut pieces) to the long sides (the ends of the three cut pieces). The short sides are attached by screwing the short slats (formerly attached to the blocks) onto the ends. The final step is to screw in the blocks as feet.
Tanya likes to use wire on the bottom of the planter, to cover the slats and create an even bottom. She covers the wire with landscape fabric and straw, then fills the planter with "farmyard manure and compost" and plants her berries. This photo shows a 2-year-old planter of strawberries, with plenty of fruit about to ripen!
 
Since the planter will be growing food, it should be made from a heat-treated pallet, not a chemically-treated one -- look for the letters "HT" in the pallet's stamp (see Tanya's blog post for examples). If you decide to paint the planter to match your decor, use non-toxic outdoor wood paint.
Strawberry season is almost here -- share this article with your gardening friends now!
Advertisement

Create a decorative addition that enhances any couch or chair. Transforming a traditional canvas tote into a unique pillow cover requires only a sewing machine and a little bit of time.
June 12   ·  
Advertisement
Never throw away your old coffee filters again! We've rounded up some fun and creative ways to transform them into something new!
June 11   ·  
June 11   ·  
We all know you can transform a terracotta pot into a pretty planter with some paint. But you can also transform them into other unique things too.
June 9   ·  
Carrie cringes over her bathroom's previous look, calling it 'dark, green, and yucky.' Not anymore!
June 3   ·  
Before all the hand-held devices, kids had to get creative when it was time to play.
May 15   ·