This DIY project transforms simple materials into a beautiful and functional backyard accessory. By gluing a shallow red dish onto a tall copper pipe, you create a stunning butterfly feeder that enhances your outdoor space. This project is not just about beautifying your garden, but also about inviting nature's delicate creatures to visit and thrive.
The butterfly feeder can serve as a focal point in your garden or complement other garden ornaments like bird baths and planters. Its vibrant color and unique design add an artistic touch, making your backyard a lively and inviting space. Place it where it catches the eye, perhaps near flowering plants to attract more butterflies.
DIY Butterfly Feeder

Materials
1 shallow red dish, approximately 8 inches in diameter
1 copper pipe, 4 to 5 feet tall
Strong outdoor adhesive or epoxy glue
Sandpaper
Measuring tape
Level
Safety goggles and gloves
Directions
Begin by selecting a location in your backyard where you want to place the butterfly feeder. Ensure the spot gets some sunlight and is near flowers that attract butterflies.
Cut the copper pipe to your desired height using a pipe cutter. 4 to 5 feet is usually ideal for visibility and accessibility.
Use sandpaper to smooth any rough edges on the cut end of the pipe. This ensures a clean and safe surface for gluing.
Apply a generous amount of strong outdoor adhesive or epoxy glue to the top end of the pipe. Make sure to follow the adhesive's instructions for best results.
Carefully center the shallow red dish on the glued end of the pipe. Press down firmly and hold for a few minutes to ensure good adhesion.
Use a level to ensure the dish is horizontally aligned. Adjust as necessary before the glue sets.
Allow the glue to cure completely, which might take several hours or overnight, depending on the adhesive used.
Once the dish is securely attached, plant the copper pipe into the ground at your chosen location. You may want to dig a small hole first for stability.
Fill the dish with a butterfly-friendly nectar solution or fresh fruit to attract butterflies.

Variations & Tips
To personalize your butterfly feeder, consider using different colors or types of dishes, such as ceramic or glass, to match your garden's aesthetic. You could also experiment with pipe materials, such as painted metal or bamboo, for a rustic look. For added stability, consider anchoring the pipe in a concrete base. Enhance the feeder's appeal by surrounding it with butterfly-attracting plants like milkweed or lavender.